Skip to content
  1. FREE SHIPPING ON ALL ORDERS OVER $300
  2. 100% MONEY BACK GUARANTEE
  3. MADE IN AUSTRALIA
  4. PREMIUM OFF-ROAD & MARINE CARE
Saltworx Flusher Canister — Garden Hose Marine Engine Flush Applicator Saltworx
Saltworx Flusher Canister — Garden Hose Marine Engine Flush Applicator Saltworx
Saltworx Flusher Canister — Garden Hose Marine Engine Flush Applicator Saltworx
Saltworx Flusher Canister — Garden Hose Marine Engine Flush Applicator Saltworx

Saltworx Australia

Saltworx Flusher Canister — Flusher Canister for Garden Hose Marine Engine Flush | Saltworx Australia

Sale price $19.00

In stock

Reusable • No Pressure Washer Needed

Saltworx Flusher Canister

The flusher canister that turns a standard garden hose into a complete marine engine flush system — in under a minute.

Saltworx flusher canister - garden hose marine engine flush applicator

Flushing your engine properly usually means a pressure washer, mixing jugs, or a mess of fittings at the ramp. The Saltworx Flusher Canister replaces all of that. It's the applicator hardware that draws Saltworx Marine Engine Flush concentrate straight from the canister and delivers it — correctly diluted — through your engine's cooling system on nothing more than household water pressure.

Fill it, set the dial, connect the hose, and run the engine. The canister meters the concentrate into the water stream for you, so every flush goes through at the right ratio without guesswork. No pressure washer, no separate mixing, no tools.

How the dilution dial works

The adjustable dilution dial controls the concentrate-to-water ratio as the flush runs. Dial it up for larger outboards and heavier salt loads, dial it back for smaller engines and PWC — one canister covers every engine size in your fleet. Because the ratio is set on the hardware, you get a consistent, repeatable flush every time instead of eyeballing a mix in a bucket.

Key features
✓  Adjustable dilution dial for any engine size
✓  Quick-connect fitting for any standard garden hose
✓  Works with outboard ear muffs and PWC flush ports
✓  No pressure washer required — runs on tap pressure
✓  Reusable hardware built for years of use
✓  Complete flush in under a minute to set up

Three steps

1
Fill the canister with concentrate and set the dilution dial.
2
Connect to a garden hose, then attach to ear muffs or the flush port.
3
Start the engine and run until the flush cycle completes.

Compatible with

Outboard motors Mercury, Yamaha, Suzuki, Honda, Evinrude, Tohatsu — single, twin and triple rigs.
Jet skis & PWC Yamaha WaveRunner, Sea-Doo, Kawasaki Jet Ski — direct to the PWC flush line.
Inboard & sterndrive Flushes cooling jackets and wet exhaust on tap pressure.
All engine sizes Handled through the adjustable dilution dial.
Applicator only — concentrate sold separately This listing is the Flusher Canister hardware. It's designed to run Saltworx Marine Engine Flush concentrate, which is purchased separately (or together in the Marine Engine Flush Kit). One canister lasts for years — just refill the concentrate as you go.

Contents & specifications

In the box 1 × Saltworx Flusher Canister
Connection Quick-connect to standard garden hose; outboard ear muffs or PWC flush port
Dilution Adjustable dial, concentrate-to-water ratio
Reusability Reusable hardware, built for years of service

People also bought

FAQ

Does the flusher canister work on outboards and PWC?
Yes — it works with outboard ear muffs and PWC flush ports.

Do I need a pressure washer?
No. The canister runs on standard garden hose pressure.

Is concentrate included?
No. This listing is for the applicator only; concentrate is sold separately or in the complete kit.

One tool. Every engine. Every flush. Set the dial, connect the hose, and give your engine a proper flush at the ramp.

Features & Benefits

✅ Adjustable Dilution Dial

✅ Plugs Into Garden Hose

✅ Suitable for Outboard, Inboard & PWC

Contents

1 x Saltworx Flusher Canister